Product sheets
Here you will find our product documentation featuring all product technical specifications.
Box providing the simplified management of inflation for a single phased or three phased fan
The Artic is a latest generation climate and/or fertilisation-irrigation management computer.
he ANJOU FERTIL BY-PASS station is a fertiliser/acid injection system especially suitable for high flow rates: up to 100m3/h.
The humidity sensor provides information on the relative humidity in %.
The sensor provides information on the ambient temperature in degrees Celsius.
The sensor provides information on the soil temperature in degrees Celsius.
The sensor provides information on the water temperature in degrees Celsius.
The insolation probe provides information on the intensity of solar radiation in Watt / m².
The light sensor provides information on solar radiation in Lux.
The sunlight/luminosity sensor combination provides information on solar radiation in W / m² and Lux.
The anemometer sensor supply information about the wind speed.
The sensor vane on both sides provides simplified information on the wind direction (right or left)
The sensor provides information on the ambient temperature in degrees Celsius and the rate of relative humidity in%.
The 0-360 ° wind vane sensor provides information on the wind direction.
The rain sensor gives a binary information about the presence of water on the sensitive element.
The sensor provides information on ambient CO2 level in ppm.
The “Cerbere” module is a sensor of absolute inclination 1 axis.
Connect all your solenoids over long distances. Simplify your wiring and future extensions.
Industrial type power and/or control cabinet. All formats available.
The ANJOU FERTIL DIRECT station is a fertiliser / acid injection station used to control the fertilization of hydroculture crops.
The Maxiclim NG can manage 6 zones with 8 outputs, 4 zones with 16 outputs or 2 zones with 24 outputs.
The Micro’Ferti is a simplified controller in a box used to manage fertilisation.
The ANJOU FERTIL station is a fertiliser / acid injection station for the management of fertilisation of hydroculture crops.
The Nero is more powerful than the Polyprog 12 programmer. It is suitable for larger installations and/or more refined irrigation management.
Ventilation control management. Automatic control using a CTN temperature sensor and proportional regulation.
The Polyprog 12 programmer combines irrigation management simplicity, fast programming and efficiency.
Sleeve to adapt to your existing on-site equipment and your working habits.
Box including contact + pump circuit breaker + V3V relay.